As of:
Translated from German. In case of discrepancies, the German version applies.
Your name in type, as in Gutenberg’s workshop
Enter a name: the tool first shows it as it would stand in the forme, set from metal type – mirror-inverted – and then as it appears on paper. You can save the result as an image. Everything happens in your browser; nothing is uploaded.
Set and print a name
What you type stays in your browser. Nothing is stored or transmitted; the image is also created on your device.
Gutenberg
“Gutenberg” needs 9 pieces of type
Key facts
- Gutenberg cast his type from lead in copper matrices; the matrices were made with steel punches into which each letter had been cut in mirror image.1,2
- With movable type, a text can be broken down into its elements and put together again as needed.3
- For the Gutenberg Bible, Gutenberg created a typeface with 299 different characters.1 Adolf Wild gives 290 characters, the Library of Congress 300.4,5
- The typeface in the tool is a free Fraktur (UnifrakturMaguntia), not a replica of the Bible type.6
How to cite this page: gutenberg-mainz.de: “Your name in type, as in Gutenberg’s workshop”. https://www.gutenberg-mainz.de/en/gutenberg-printing/name-in-type/, accessed (date you accessed it). For individual statements, please also cite the source of the footnote number.
Why the name is reversed in the forme
Printing works like a stamp: whatever is to read the right way round on paper has to stand mirror-inverted in the forme. That is why the making of every piece of type began with a mirror-image steel stamp, the punch.1 The punch was used to strike the matrix in which the type was cast. Once it had cooled, the sprue was broken off and the type was filed to a uniform size – this is how the Library of Congress describes the method that was customary from the 15th to the 18th century.2
inferred Mirror-inverted type in Gutenberg’s workshop – inferred. The Library of Congress does not say explicitly that Gutenberg’s own workshop worked exactly like this; the Neue Deutsche Biographie confirms steel punches, copper matrices and lead casting.1,2
From setting to print
Gutenberg’s system included the type case and the composing stick.7 The finished forme lay on the bed of the press; the ink was dabbed onto the type with leather ink balls, then the dampened sheet was laid on and printed with the press.8 This description applies to the hand press of the 15th to 18th centuries; for Gutenberg himself it is inferred.
In the Gutenberg Bible – after early attempts at printing in red – only the text was printed. Each buyer had the coloured decoration and the binding made separately by craftsmen.9 So the red initial letter in the tool’s image is not printing but a reminder of this handwork.
How the six steps from the punch to the press fit together is shown in the workshop in six steps.
Which typeface did Gutenberg use?
According to Princeton University Library, the Gutenberg Bible is printed in an angular Gothic type that matched the most solemn script of liturgical manuscripts.10 According to the Neue Deutsche Biographie, the type comprised 299 different characters – considerably more than the letters of the alphabet.1 Adolf Wild gives 290 characters, the Library of Congress 300.4,5
Ligatures and abbreviations: Many of these characters are variant forms, joined letters (ligatures) and contractions (abbreviations) of the kind scribes used in manuscripts.11 How the system worked is explained, with examples and open questions, on the page The typeface of the Gutenberg Bible. If you would like to see the characters for yourself, you can find the two Mainz copies as a digitised version (see the page Gutenberg in 60 minutes).
Which typeface the tool uses
The tool sets your name in UnifrakturMaguntia. According to its project, this typeface is based on Peter Wiegel’s typeface “Berthold Mainzer Fraktur” – so it is a Fraktur and not a replica of the Bible type.6 It automatically joins some pairs of letters into a ligature, for example “tz”.6
The typeface is licensed under the SIL Open Font License 1.1 and comes from the Google Fonts directory (designer j. ‘mach’ wust, with Peter Wiegel in the copyright notice).12 It is stored as a file on this server; no fonts are loaded from third-party servers. You can find the licence text at /lizenzen/OFL-UnifrakturMaguntia.txt.
Frequently asked questions
Is my name stored? No. The page processes what you type only in your browser; the image is also created there. There is no upload and no form that sends anything.
Why do some characters appear in a different typeface? The version of the typeface included here contains the letters of Western European languages with umlauts and ß, but not, for example, the long s (“ſ”) or characters of other writing systems. Your device shows such characters in a substitute font; the tool points this out.
May I use the image? The image shows your own text. The typeface is licensed under the SIL Open Font License 1.1, which expressly permits its use; conditions apply to passing on the font file itself, not to texts set with it (licence text at /lizenzen/OFL-UnifrakturMaguntia.txt). This is not legal advice.